Lifting actuator for use in heating, ventilation and air conditioning applications. The actuator is designed for connection to 2 and 3-way BELIMO fittings.

Function

In operation, the drive is subject to a 0 ... 10 V control signal and moves to the position specified by the signal. It receives the signal from the controller via an MP-Bus connection. The position can also be set manually. The actuator is suitable for Loxone system.

Emergency functions

With the special emergency position knob, you can set any position in increments of 10% in the range 0 ... 100%. In the event of a power failure, the drive will lower to this set safety position.

Properties:

• easy direct mounting on the valve by means of a shaped clamp
• possibility of manual adjustment using the locking button
• the actuator is overload protected, does not need any end stops and remains automatically stopped
• connection bracket as part of the lift drive
• stroke marked on the holder
• control signal 0 ... 10 V
• possibility to connect sensor or switching contact
• emergency functions