Questions? +32 460 226 991 (English). EU-wide delivery!

Ammonia gas detector with EVIKON E2638-R-NH3-LCD LCD display

Ammonia gas detector with EVIKON E2638-R-NH3-LCD LCD display

EVIKON
  • Product code: E2638-R-NH3-LCD
  • Manufacturer code: E2638-R-NH3-B-LCD
  • Warranty: 2 years

Ammonia gas detector EVIKON E2638-R-NH3-LCD, warning signal: visual + acoustic, LCD display, power supply: 90 ... 265 VAC, typical detection range range: 0-500ppm. More information

  • Availability

    Out of stock - can be requested

  • Out of stock  
Price without VAT € 534,23
Price with VAT 21 % € 646,42
+

Would you like to get a price offer? Contact us

Parameters and catalogs

Detector type Stationary
Output signal ModBus RS485, 2x Switching relay, 2x Analog output 4-20mA/0-10V
Power 230 VAC
Type of gas NH3 - Amoniak
Weight 0.50 kg

DECLARATION OF CONFORMITY download

Download PDF

Evikon E2638-R-NH3-LCD gas detector

Ammonia gas detector is used to detect and warn early of a dangerous (explosive or toxic) concentration of the sensed gas. The detector is suitable for use in refrigeration facilities, warehouses etc. It is not recommended to use the detector in spaces with constantly high ammonia concentration such as cattle, pig and poultry livestock houses, since it shortens the sensor lifetime. The detector is equipped with two-level signaling - visual (LCD display) and audio (85db). Furthermore, two output relays (potential-free) with make contact can be used for remote signaling or ventilation / EM valve control, etc. The detector is built on a unified PluraSens platform. The platform enables connection of the detector, in addition to switching relays, also by two analog outputs 0-10V/4-20mA and digital interface ModBus RS485.
Made in robust design with IP65 protection - ABS plastic, resistant to mechanical damage. Rigid, tough, resistant to low and high temperatures, poorly absorbent, harmless to health.

The service life of the detector is more than 10 years.  

The default alarm values are set to 25ppm and 100ppm NH3. When ordering, it is necessary to specify the application to select the correct sensor type. The recommended coverage area per detector is 80-120 m2, 5-6m radius.

Each detector is factory-calibrated to default values. The law states that recalibration must be performed at least once every 12 months. Calibration may only be performed by a person certified by the manufacturer.

For more information on calibrations - www.kalibrovat. cz 

The detector is designed to detect flammable gases:

Ammonia (NH3)

DETECTOR CALIBRATED ON AMMONIA.

Features:

  • Selective, sensitive and stable detection of flammable gases
  • Electrochemical cell sensor
  • Wall mounting, IP65 protection
  • Visual and acoustic alarm
  • LCD display
  • Two output relays for alarm/ventilation control
  • Digital communication ModBus RS485
  • Two analog output signals 0-10V/4-20mA

Tip: Get notified by the service about the date of legal calibration www.kalibrovat.cz

Tip: The detector can be equipped with a remote cable sensor.

We respond to your product queries as quickly as possible, usually within 24 hours.

Didn't find what you wanted to know?