The gas detector is used to detect and warn early of a dangerous (explosive or toxic) concentration of the sensed gas. The detector is suitable for use in residential, business and industrial indoor spaces with the possibility of accumulating hazardous amounts of gas.

The detector is equipped with two-level signaling - 2x visual (LED) and acoustic (85db). For each gas measured there are two output relays with changeover contact (ie 4x changeover relay) can be used for remote signaling or ventilation control.

Made in robust design with IP65 protection - non-flammable ABS plastic, resistant to mechanical damage. Rigid, tough, resistant to low and high temperatures, poorly absorbent, harmless to health.

The service life of the detector is more than 5 years.

The default alarm values are set to 65ppm and 130ppm CO. Second sensor on 10% DMV and 20% DMV CH4. The recommended coverage area per detector is 80-120 m², 5-6m radius.

Each detector is factory calibrated and a calibration report is included. The law states that recalibration must be performed at least once every 12 months. Calibration may only be performed by a person certified by the manufacturer.

Do not hesitate to contact us for recalibration!

The detector is designed for the detection of gaseous CO and Methane CH₄.

Features:

• Selective, sensitive and stable detection of flammable gases
• Metal oxide or electrochemical sensor
• Wall-mount IP65 protected housing
• Acoustic and visual alarm 
• Two output relays for alarm/ventilation control

Tip: Get notified by the service about the date of legal calibration www.kalibrovat.cz