Wilo-Stratos Z PN 6/10 Pump

Highly efficient, electronically controlled wet-running circulation pump with the lowest operating costs, designed for installation in pipelines. Suitable for potable water circulation systems (0°C to +80°C), and for use in heating, ventilation, and air conditioning systems (-10°C to +110°C). Features integrated electronic power regulation for constant/variable differential pressure. Thermal insulation is standard.

Standardly equipped with manual one-button control for:

• Turning the pump on/off 
• Selecting the control mode: - dp-c (constant differential pressure)
• dp-v (variable differential pressure)
• dp-T (temperature-controlled differential pressure) via infrared monitor/flash drive, Modbus, BACnet, LON, or Can bus
• Q limit to restrict maximum pumping capacity (setting only via IR-flash drive)
• Fixed speed mode (setting constant speed)
• Automatic setback mode (self-learning)
• Setting the desired value or speed

Graphical pump display with rotating indication for horizontal and vertical module arrangement, indicating:

• Operating status
• Control mode
• Desired differential pressure value or speed
• Error and warning messages

ECM technology synchronous motor with highest efficiency and high starting torque, automatic unblocking function, and integrated full motor protection.

Fault indicator, volt-free collective fault signal, infrared interface for wireless communication with Wilo service and operating device - infrared monitor/flash drive.
Connection point for Wilo IF modules Stratos with interfaces for GA automatic building management or dual pump control (accessories: IF modules Stratos Modbus, BACnet, LON, CAN, PLR, Ext.off, Ext.Min, SBM, Ext.off/SBM or DP).

Delivery Contents

• Pump
• Thermal insulation
• Wilo connector for faster power connection
• Installation and operating instructions