The room thermostat come with a pre-loaded set of applications. The relevant application is selected and activated during commissioning using DIP switches and controls or ACS service SW or ETS configuration SW.

Features: 

• KNX bus communication (S-mode and LTE mode)
• Backlit display
• 2P / PI / P control
• Outputs for on/off, PWM or 3-position control
• Outputs for 3-speed or 1-speed fan
• 3 multifunctional inputs for keycard contact, external sensor, etc.
• Operating modes: Comfort, Economy and Protection
• Automatic or manual fan speed control
• Automatic or manual heating / cooling changeover
• Minimum and maximum limitation of room temperature setpoint
• Control depending on the room or the return air temperature
• Optional output relay functions (RDG16 ... KN)
• Built-in sensor and relative humidity control (RDG165KN)
• Adjustable commissioning and control parameters
• Commissioning with Synco ACS700, ETS3 Professional or via local HMI
• Integration into Synco
• Integration into DESIGO via group addressing (ETS3) or via individual addressing
• Integration into third-party system via group addressing (ETS3)
• AC 230 V Operating voltage