Methane Detector is used for measuring the values of detected gas in the air and providing timely warnings against dangerous (toxic) concentrations.

It does not have its own light and sound signalling. The E2670 series detectors are an intelligent solution for modern applications with ModBus RS485 communication and two analogue outputs 4-20mA/0-10V. They are also equipped with two switching relays that activate connected devices upon recording two pre-set values.

Manufactured in a robust aluminium design with IP66 protection, resistant to mechanical damage. Rigid, tough, resistant to low and high temperatures, non-hazardous to health. Suitable for use in ATEX zones 2 and 22. More details about ATEX in the declaration of conformity and technical sheet.

Each detector is factory-calibrated to default values (described in the manual). According to user needs, the detector can be set to a measuring range of 0...100% LEL. The law states that recalibration must be carried out at least once every 6 months. Calibration can only be performed by a person certified by the manufacturer.

The recommended coverage area for one sensor is 80-120 m², 5-6 m radius.

For recalibration, do not hesitate to contact us!

The detector is designed to detect:
Acetylene / Butane / Propane / Hydrogen / Methane
Factory calibrated for Methane (For setting to another gas, provide information in the order note)

Features:

• Sensitive and stable detection
• Long lifespan of the semiconductor sensor
• Wall mounting, IP66 protection
• ATEX zones 2, 22
• Two analogue outputs 4-20mA/0-10V
• Digital communication ModBus RS485
• 2 x switching relays

Tip: Get automatically notified of the legal calibration date with the service www.kalibrovat.cz