The flammable gas detection sensor is designed to detect and provide early warning of dangerous (toxic) concentrations. The DM design allows the sensor to be installed directly into the HVAC duct.

Detectors should be mounted at a height above the floor according to the gas being detected. When used in HVAC ducts, the sensor is placed directly in the airflow.

The EVIKON E2608-LEL detector is equipped with a two-stage alarm with outputs to switching relays. It does not have its own light and sound alarm. The E2608 series detectors are an intelligent solution for modern applications with ModBus RS485 communication and two analogue outputs 4-20mA/0-10V.

The sensor can be ordered in the following versions:

• Wall-mounted (in stock)
• For HVAC duct (on request)
• With cable probe (on request)

Manufactured in a robust design with IP65 protection - ABS plastic, resistant to mechanical damage. Rigid, tough, resistant to low and high temperatures, low absorbency, non-toxic. The sensor's lifespan is more than 10 years.

Each sensor is factory calibrated to default values (described in the manual). The law requires recalibration at least once every 6 months. Calibration can only be performed by a person certified by the manufacturer.

For recalibration, do not hesitate to contact us!

THE DETECTOR IS CALIBRATED FOR PROPANE.

The sensor is designed to detect flammable gases:
Methane (CH₄), Propane (C₃H₈), Butane (C₄H₁₀), Hydrogen (H₂), Acetylene (C₂H₂)

Features:

• Selective, sensitive, and stable detection
• Long sensor lifespan
• Wall mounting, duct mounting, remote probe, IP65 protection
• Two output relays for alarm/control of ventilation
• Two analogue outputs 4-20mA/0-10V
• Digital communication ModBus RS485

Tip: Get automatically notified of the legal calibration date with the service www.kalibrovat.cz