Evikon E2670-LEL flammable gas sensor with ModBus RS485 digital communication and two 4-20mA/0-10V analog outputs. Protection IP66. 24 VDC power supply. Suitable for ATEX zones 2 and 22. More information
Out of stock - can be requested
Would you like to get a price offer? Contact us
Detector type | Stationary, ATEX zone 22, ATEX zone 2 |
Output signal | ModBus RS485, 2x Analog output 4-20mA/0-10V |
Power | 24 VDC |
Type of gas | CH4-Methane, H2-Hydrogen, C4H10-Butane, C3H8-Propane, C2H2-Acetylene, C3H8-Propane |
Weight | 1.00 kg |
DATA SHEET ENG download
Download PDFDECLARATION OF STAIRCASE download
Download PDFThe combustible gas sensor is used to measure the values of the detected gas in the air and provide early warning of a dangerous (toxic) concentration. The sensor is suitable for use in underground garages, boiler rooms, kitchens and other closed spaces with the possibility of accumulating dangerous amounts of gas. Hazardous gas concentration sensors are usually used in combination with central gas detection in a safe zone (outside Ex).
It does not have its own light and sound signaling. E2670 series sensors are an intelligent solution for modern applications with ModBus RS485 communication and two 4-20mA/0-10V analog outputs . The sensors need to be connected to the central unit, which processes and evaluates the collected data.
Made in a robust aluminum design with IP66 protection , resistant to mechanical damage. Rigid, tough, resistant to low and high temperatures, harmless to health. Suitable for use in ATEX zones 2 and 22 . More details about ATEX in the Declaration of Conformity and Technical Data Sheet.
Each sensor is factory-calibrated to default values (described in the manual). The law states that recalibration must be carried out at least once every 12 months. Calibration can only be performed by a person certified by the manufacturer.
The recommended coverage area with one sensor is 80-120 m 2 , 5-6 m radius.
Do not hesitate to contact us for recalibration!
The sensor is designed to detect:
Methane / Propane / Butane / Hydrogen / Acetylene
Calibrated at the factory for Propane (To set it to another gas, state the information in the order note )
Tip: Let the www.kalibrovat.cz service automatically notify you of the legal calibration date
We respond to your product queries as quickly as possible, usually within 24 hours.
Didn't find what you wanted to know?