By using this site, you agree to the storage of cookies (see  Terms of use). Cookies are required for the site to work. I understand

Questions? +32 460 226 991 (English). EU-wide delivery!

Danfoss Icon

Danfoss Icon™ is an advanced control solution for your underfloor heating. Maximum comfort and as well as simple solution. This system is suitable for smaller households as well as for larger houses or apartments. The system consists only of the Danfoss Icon™ Master Controller and individual room thermostats.

Zone control for everyone

With conventional thermostats, you can only set your desired temperature. While some slightly more sophisticated thermostats allow you to set a daily or weekly program and the thermostat will turn on and off the heating accordingly, smart thermostats communicate with your phone or recognize that you are on your way home and start heating up. However, all this only according to one reference room. Danfoss Icon™ goes one step further and combines a smart thermostat with zone control. Each room in the house or apartment has different heat losses. Some rooms may be colder and others may be overheated. This is exactly what zone control solves. You can zone the individual rooms as required. Then you just set the right temperature in each zone on the thermostat and the zone controller will take care of everything else.

Convenient floor heating control

The individual zone controls are often solved only by heating radiators, where you fit each radiator with a thermostat, which then closes and opens according to the heat demand. Modern approach to heating relies more and more on underfloor or ceiling heating. Radiators in the room occupy too much space. Underfloor heating saves space and evenly distributes the heat throughout the room. Correct and smart control that you won't even hear is guaranteed by the Danfoss Icon™ system.

What will I need?

Smart zone heating control systems are very often complex and confusing. The question is always whether the system will work in my house or whether I have bought all the components. The Danfoss Icon control system includes all the necessary components. Installation is simple and convenient. Simply put, you will need a master controller, thermostats, actuators for control valves and expansion modules according to the level of comfort you are looking for.

Wireless

Wired 24V

Wired 230V

Themostats: 

  • Display 
  • Display + infrared sensor
  • Dial

Themostats: 

  • Display 

Themostats: 

  • Display
  • Programmable
  • Dial

Versions:

On-wall

Versions:

On-wall / In-wall

Versions:

On-wall / In-wall

Exchangeable frame:

No

Exchangeable frame:

Yes - In-wall

Exchangeable frame:

Yes - In-wall

Icon app:

Yes

Icon app:

Yes

Icon app:

No

Cooling options

Automatic + Manual

Cooling options

Automatic + Manual

Cooling options

Manual

Automatic balancing

Yes

Automatic balancing

Yes

Automatic balancing

No

Communication:

Wireless

Communication:

Wired

Communication:

Wired 230V

Max zones:

3 x 15 = 45 zones

Max zones:

3 x 15 = 45 zones

Max zones:

1 x 8 = 8 zones

Room thermostats fit into the switch frame

Danfoss Icon ™ room thermostats have been designed precisely to fit in any interior. The thermostat does not protrude anywhere due to the fact that it fits into the frame of a normal switch. After a certain period of inactivity, the display backlight turns off and the thermostat is almost invisible. When touched, it lights up again and shows the current room temperature. The Danfoss Icon™ room thermostat fits in an electrical box. The On-wall version is ideal if the thermostat does not fit in your electrical box or there is none in the wall at all. Only with a depth of 25 mm and a frame of 86 x 86 mm, the on-wall thermostat is no more distinctive than a standard switch or socket.

Thermostat with dial Thermostat with display Programmable thermostat Thermostat with display and infrared underfloor sensor
  • Can be built into many switch frames (in-wall only)
  • Up to 5x2W NC or NO actuators
  • Accurate temperature measuring
  • Temperature limitation
  • Noiseless control
  • Can be built into various frames
  • Up to 5x2W NC or NO actuators
  • Accurate PWM temperature measurement
  • Temperature limitation
  • Possibility to connect a floor sensor

  • Noiseless control
  • Can be built into various frames
  • Up to 5x2W NC or NO actuators
  • Accurate PWM temperature measurement
  • Temperature limitation
  • Possibility to connect a floor sensor
  • 7 pre-defined programs
  • Adaptive learning
  • Noiseless control
  • Can be built into various frames
  • Up to 5x2W NC or NO actuators
  • Accurate PWM temperature measurement
  • Temperature limitation
  • Infrared floor sensor

Danfoss Icon™ Master Controller - a concept for every application

The wired 24V / wireless version of the Master controller provides several advanced features that can be expanded even further with expansion modules. For example, you can choose from 10 pre-defined settings for common applications. These settings cover the behavior of all inputs and outputs from the controller.

The Danfoss Icon™ controller has automatic balancing, pump switching, boiler switching, test function and PWM control. Last but not least, the controller can learn on its own. This means that it knows how fast your system heats up and, if necessary, switches on the heating sooner or later to guarantee you the perfect comfort temperature in each zone. The controller works with 24V voltage. You can choose from two variants with 10 or 15 outputs for actuators. The actuators are wired to the controller. Actuators are then installed on each underfloor heating circuit. Thermostats can be connected in two ways. The first method is wired, where the controller is connected to the thermostat using a cable. The second method is wireless. For this method, it is necessary to purchase wireless versions of thermostats and at the same time an expansion module of the controller for wireless communication.

Control from anywhere

It is uncomfortable to return home after a winter holiday to find in unbearably cold. Switching on the heating in time or checking the current temperature in the house from anywhere is common today. The Icon App extension module gives you access via your mobile phone. The module is plugged into the master controller and connected to the home WiFi network. Simply install the app on your phone and control the entire system from anywhere. Try demo version before purchasing the full system. You can download the app here: