Questions? +32 460 226 991 (English). EU-wide delivery!

Pressure switch Honeywell DCM6

Pressure switch Honeywell DCM6

HONEYWELL
  • Product code: DCM6
  • EAN : 4024627011436
  • Manufacturer code: DCM6
  • Warranty: 2 years

Honeywell DCM6 pressure switch for overpressure monitoring. More information

  • Availability

    GLS delivery 3-4 working days. DHL express delivery 1-2 working days.

  • In stock 5 pcs  
     
List price € 275,83
Price without VAT € 182,37
Price with VAT 21 % € 220,67
+

Would you like to get a price offer? Contact us

Parameters and catalogs

Connection size DN 15
Connection type Male thread
Pressure range 50...600 kPa
Protection IP IP 54
Weight 0.55 kg

CATALOG SHEET ENG download

Download PDF

The Honeywell DCM6 universal pressure switch is used for switching and monitoring overpressure. It can be used in mechanical engineering, the printing industry, pneumatics and hydraulics. The switch is primarily intended for falling pressure, therefore the setting of the switching value on the scale corresponds to the point at falling pressure. The reset point of the switch is then higher by the value of the difference between the two values. The area between the reset point and the switching value determines the differential tolerance in which the pressure can move arbitrarily without switching on. The tolerance range is fixed at the factory and cannot be reset.

Construction

  1. pressure connection
  2. measuring bellows
  3. housing
  4. pressure pin
  5. connecting bridge
  6. pivot points
  7. switching element
  8. Springs
  9. spindle setting (not this model)
  10. lock nut
  11. switch calibration screw
  12. backpressure spring

The pressure passing through the switch through the connection (1) acts on the measuring bellows (2). When it is changed, the bellows move, their movement is transmitted through the pressure pin (4) to the connecting bridge (5). As the pressure rises, the bridge pushes on the switching element (7) and actuates it. The counterweight is secured by a spring (8). The switching element can be calibrated using the screw (11). The back-pressure spring (12) is designed for stable switching even at a low set value.

Properties

  • pressure range 0.5 ... 6 bar
  • differential tolerance 0.14 ... 0.26 mbar
  • max pressure 16 bar
  • operating temperature -25 ... 70 ° C
  • max medium temperature 0 ... 70 ° C, short-term up to 85 ° C

We respond to your product queries as quickly as possible, usually within 24 hours.

Didn't find what you wanted to know?