Evikon E2638-R-LPG-LCD combustible gas detector (PROPANE)

The gas concentration detector (gas detector) is used to detect and warn early of a dangerous (explosive or toxic) concentration of the sensed gas. The detector is suitable for use in underground parkings, boiler houses, kitchens, battery charging rooms and other areas, where potentially explosive concentration of combustible gases can accumulate. The detector is equipped with two-level signaling - visual (LCD display) and audio (85db). Furthermore, two output relays (potential-free) with make contact can be used for remote signaling or ventilation / EM valve control, etc. The detector is built on a unified PluraSens platform. The platform enables connection of the detector, in addition to switching relays, also by two analog outputs 0-10V/4-20mA and digital interface ModBus RS485.
Made in robust design with IP65 protection - ABS plastic, resistant to mechanical damage. Rigid, tough, resistant to low and high temperatures, poorly absorbent, harmless to health.

The service life of the detector is more than 10 years.

The default alarm values are set to 10% and 20% of the lower explosion limit of methane (LEL). The detector also reacts to other flammable gases. The recommended coverage area per detector is 80-120 m², 5-6m radius.

Each detector is factory calibrated (10 and 20% LEL). The law states that recalibration must be performed at least once every 12 months. Calibration may only be performed by a person certified by the manufacturer.

For more information on calibrations - www.kalibrovat. cz 

The detector is designed to detect flammable gases:

Methane (CH₄), Propaen (C₃H₈), Butane (C₄H₁₀), Hydrogen (H), Acetylene (C₂H₂)

DETECTOR CALIBRATED FOR PROPANE.

Features:

• Selective, sensitive and stable detection of flammable gases
• Metal-oxide semiconductor sensor
• Wall mounting, IP65 protection
• Visual and acoustic alarm
• LCD display
• Two output relays for alarm/ventilation control
• Digital communication ModBus RS485
• Two analog output signals 0-10V/4-20mA

Tip: Get notified by the service about the date of legal calibration www.kalibrovat.cz

Tip: The detector can be equipped with a remote cable sensor.