Questions? +32 460 22 69 91 (English).   Holiday Tue 17 Nov – dispatch Wed 18 Nov.

Pump for Domestic Hot Water Grundfos UPS 25-40N (96913060)

Pump for Domestic Hot Water Grundfos UPS 25-40N (96913060)

GRUNDFOS
  • Product code: 96913060
  • EAN : 5700313543083
  • Manufacturer code: 96913060
  • Warranty: 2 years

Grundfos UPS 25-40 N is a DHW circulation pump with a stainless steel housing. Three speed settings, head 4 m, flow rate 2.8 m³/h, PN 10. More information

  • Delivery

    Delivery to Belgium (days are avarages)

    FedEx:
    2.1 workdays € 7,02
    Bpost HD (Home Delivery):
    4.1 workdays € 11,12
    BPost - PP (Pick-up Point):
    4.2 workdays € 10,39
    FedEx Priority:
    1.6 workdays € 17,18
    DHL Express:
    0.9 workday € 22,99

    DHL Express: 0.9 workday, € 22,99

  • In stock 4 pcs  
     
List price € 503,36
Price excluding VAT € 274,56
Price with VAT 21 % € 332,22
− +

Parameters and catalogs

Building length 180 mm
Connection Type External thread
Liquid temperature 2...110 °C
Material Stainless steel
Power Supply 230 VAC
Pressure PN 10
Pump bore DN 25
Pump connection size 6/4"
Pump flow rate 2.8 m3/h
Pump head 4 m
Weight 2.79 kg

Datasheet download

Download PDF

Grundfos UPS 25-40 N is a wet-running circulator pump designed for the circulation of domestic hot water (DHW) in heating and air-conditioning systems. The pump body is made of stainless steel, making it suitable for direct contact with potable water. The output is adjusted by a mechanical three-speed selector switch according to the requirements of the circulation circuit.

Where the pump is used

The pump is installed in the domestic hot water circulation loop – most commonly between a storage water heater or hot water cylinder and the furthest draw-off point in the pipework. It keeps the water in the loop constantly moving, so you do not have to wait as long for hot water at the tap as you would with a system without circulation. Thanks to its stainless steel body, it is suitable for direct contact with potable water in apartment buildings, family houses, hotels and smaller commercial premises.

Design and operation

The rotor is enclosed by a stainless steel insulating can, so the pump has no conventional shaft seal – sealing is provided only by two sealing rings. The radial bearings and shaft are ceramic, the thrust bearing is carbon, and the bearings are lubricated directly by the pumped liquid. As a result, operation is maintenance-free and with a low noise level. The motor is single-phase (1× 230 V) and does not require any additional motor protection – thermal protection is provided by impedance protection.

Speed settings and power consumption:

  • Speed 1: power input 25 W, current 0.12 A
  • Speed 2: power input 35 W, current 0.16 A
  • Speed 3: power input 45 W, current 0.2 A
  • Voltage: 1× 230 V, 50 Hz
  • Protection rating: IP44

Frequently asked questions

Yes. The pump body is made of stainless steel (DIN W.-Nr. 1.4301) and the impeller is made of PES/PP composite, so the pump is designed specifically for domestic hot water circulation.

By a mechanical selector switch directly on the pump terminal box, which has three speed settings with power inputs of 25, 35 and 45 W. Electronic control or app-based operation is not available on this model.

No, it is maintenance-free in operation. The bearings are lubricated directly by the pumped liquid, and the pump has no conventional shaft seal that would need to be checked or replaced regularly.

G 1½" external thread (DN25), with an installation length of 180 mm between the suction and discharge ports. The connection matches standard unions for this type of circulator pump.

We respond to your product queries as quickly as possible, usually within 24 hours.

Nenašli jste to, co jste chtěli vědět?