Questions? +32 460 226 991 (English). EU-wide delivery!

Submersible drainage pump with float Wilo TMW 32/11HD (4048715)

  • 3 variants

Submersible drainage pump with float Wilo TMW 32/11HD (4048715)

WILO
  • Product code: 4048715
  • EAN : 4016322499541
  • Manufacturer code: 4048715
  • Warranty: 2 years

Submersible drainage sump pump with "swirl" function and float switch. It includes a 4 m long cable with plug, motor protection, aggressive pumped media. More information

  • Availability

    GLS delivery 3-4 working days. DHL express delivery 1-2 working days.

  • In stock 2 pcs  
     
List price € 355,74
Price without VAT € 220,50
Price with VAT 21 % € 266,81

Varianty produktu

+

Would you like to get a price offer? Contact us

Parameters and catalogs

Cable length 4 m
Float Yes
Head max 11 m
Maximum particle size 10 mm
Power 230 VAC
Pump diameter 165 mm
Pump flow 14 m3/h
Weight 7.20 kg

Operating Instructions download

Download PDF

Catalog sheet download

Download PDF

The Wilo TMW32 / 11 HD submersible slurry pump with float is an irreplaceable helper for pumping water at home. The pump is ready for fully automated operation. It is light and easy to carry, it is suitable for both fixed and mobile installation . It is possible to use a pressure hose or pipe for water drainage (especially for permanent placement).

The engine is cooled by the surrounding medium , it transfers its residual heat to the surroundings through its casing. In the event of overheating, the pump switches off and restarts after it has cooled down. The hydraulics are separated from the engine by a sealing chamber filled with white oil. There is a shaft sealing ring on the motor side and a mechanical seal on the hydraulic side.

Twister function

The TMW sludge pump is equipped with a so-called "swirl" . In practice, this means that, thanks to its design, there is a constant swirl in the suction space. In this way, the cleanliness of the pump sump is achieved. Due to the "swirl" property and the associated removal of sedimenting substances, no odor is caused by the pumped medium. The swirl function can be deactivated, increasing the pump characteristic by 1 m.

Using the pump

Pumping clean or slightly contaminated water:

  • from tanks, shafts and excavations
  • during floods and floods
  • from sinks
  • during drainage of cellars
  • water without faeces and long-fiber components
  • aggressive media - pool water, salt water, condensate

Features and equipment of the pump

  • float switch (factory mounted)
  • Twister function
  • connecting cable with a length of 4 m incl. "Schuko" plugs
  • cooling by bypassing the pump casing
  • IP68
  • thermal control of the engine
  • the temperature of the pumped medium is +3 ... + 35 ° C (for a short time up to 3 minutes, the medium can be pumped up to a temperature of 90 ° C
  • max. immersion depth 1 m
  • discharge port Rp 1 1/4 (female thread DN32).

Scope of delivery

  • pump
  • cable with plug
  • installed float switch
  • threaded connection with check valve
  • hose connection
  • installation and operating instructions

We respond to your product queries as quickly as possible, usually within 24 hours.

Didn't find what you wanted to know?