If you are in search of a pump for pumping clean or slightly cloudy water without mechanical impurities, the RUCHE submersible vibrating pump is an ideal choice for you. RUCHE pumps are based on Malyš pumps. Durable materials are used in production - stainless steel, aluminum, copper - where reliability and safety are equally important. Applications are for water supply in cabins, cottages, garden irrigation, washing cars, etc. The pump can also be used to drain and clean boreholes before installing a more expensive electronic pump such as SQE from Grundfos.

Operation is very simple and due to its small external dimensions it can be used in drilled wells from 104 mm in diameter (the majority of boreholes are suitable) and to a depth of 40 m. You will also appreciate its low weight, low power consumption, easy transportability and installation.

The pump has a bottom suction, which means that under certain conditions it can pump out more water than the RUCHE 2T pump with a top suction. However, if the pump is too close to the bottom it can suck up impurities, which is not that important when placed in a drilled well. Even so, the pump can be submerged to a depth of 10 m.

The pump is equipped with a thermal protection that automatically disconnects in case of coil overheating. After cooling down, the electric circuit closes again, thus protecting the coil from burning and not shortening the pump service life.

The submersible pump is not suitable for continuous operation (e.g. artificial streams, waterfalls, fountains) and for pumping chemical products, food, salt water and water containing solid particles. After 2 hours of continuous operation, the pump must be switched off for 20 minutes to protect against possible damage to the pump coil.