Questions? +32 460 226 991 (English). EU-wide delivery!

Wilo DrainLift SANI-S.11M/1 (1~230V) wastewater pumping device (2549900)

  • 2 variants

Wilo DrainLift SANI-S.11M/1 (1~230V) wastewater pumping device (2549900)

WILO
  • Product code: 2549900
  • EAN : 4062679006543
  • Manufacturer code: 2549900
  • Warranty: 2 years

Wilo Drainlift SANI-S wastewater pumping plant. Transport height 11 m, power supply 230 VAC. More information

  • Availability

    GLS delivery 3-4 working days. DHL express delivery 1-2 working days.

  • In stock 1 pcs  
     
List price € 2 631,75
Price without VAT € 1 631,25
Price with VAT 21 % € 1 973,81

Varianty produktu

+

Would you like to get a price offer? Contact us

Parameters and catalogs

Dimensions 511x490x490
Head max 11 m
Maximal temperature 40 °C
Number of inputs 1
Power 230 VAC
Pump flow 28 m3/h
Volume 46 l
Weight 35.50 kg

CATALOG SHEET download

Download PDF

INSTRUCTIONS download

Download PDF

The Wilo Drainlift SANI pumping unit is intended for pumping wastewater containing faeces in cases where it can not be discharged by gravity into the sewer , or in cases of drainage resistant to backflow, if the drain point is below the level of backflow. The device is compact and immediately ready for connection and commissioning.

The collecting tank is airtight and watertight with an inclined inlet collecting space. Thanks to the transparent lid and the cleaning opening on the non-return valve, maintenance and cleaning are easy. High reliability is ensured by stainless material made of technical plastics and stainless steel. The great advantage of the device is high flow, high switching volume, thermal motor protection and alarm . The level in the tank is measured with an analog output signal of 4 ... 20 mA.

The transfer station is automatically controlled by the Wilo-Control MS-L switchgear . In the event of a fault, an autonomous alarm is activated. Fault messages are transmitted by a potential-free contact. The switchgear allows you to set the deceleration time. It is powered by a 1.5 m cable with a plug.

Drainlift SANI-S is the smallest and lightest device for pumping wastewater according to EN 12050-1. It is a great choice for family houses and semi-detached houses. Easy to transport due to compact dimensions and low weight.

Function

Waste water is piped to the collection tank of the pumping station. As soon as it reaches the switching volume, the pump is switched on and the water is pumped into the connected pressure line. When the switch-off point is reached, the pump switches off again.

If the level is too high, the pump switches on and the warning LED on the station starts flashing. An internal audible alarm and a collective fault output are activated.

Properties

  • transport height 11 m.
  • power supply 1 ~ 230 V
  • switching machine with autonomous alarm and collective fault message
  • transparent tank cover
  • inspection opening on the non-return valve
  • thermal control of the engine
  • analog level measurement (4 ... 20 mA)
  • volume 46 l
  • switching volume 25 l
  • pumped medium temperature 3 ... 40 ° C, max 65 ° C for 5 minutes
  • optional Wilo SmartHome connection
  • reliability and long life of materials
  • easy installation
  • IP68 station protection
  • switching machine protection IP54

Package contents

  • pumping station with switchgear and supply cable with plug
  • flange socket DN 80/100
  • sealing sleeve for discharge connection
  • sealing sleeve for vent connection
  • sealing sleeve for drain connection
  • inflow set with exclamation mark and seal
  • fastening material
  • insulation mat
  • 9 V battery
  • instructions

Not intended for pumping:

  • wastewater in buildings above the level of backflow
  • rubble, ash, garbage, sand, glass, gypsum, cement, lime, mortar, fibrous materials, textiles, paper towels, wet wipes and tissue paper, diapers, cartons, rough paper, synthetic resin, tar, kitchen waste, grease, oils
  • waste from slaughter, veterinary remediation, animal husbandry
  • toxic, aggressive, corrosive media
  • cleaning, disinfecting, washing and washing agents in overdosed quantities
  • excessive foaming agents
  • drinking water

Notice

  • The pumped medium in the tank must have a pH of 5 to 12, neither lower nor higher
  • if the pumped water contains fats, a grease trap should be installed in front of the station
  • it is forbidden to pump easily ignitable and explosive media = there is a risk of fatal injury in case of explosion

We respond to your product queries as quickly as possible, usually within 24 hours.

Didn't find what you wanted to know?