Most searched for brands of measuring and regulation technology
Fully integrated Wilo ISAR BOOST5 domestic water station with built-in frequency converter to maintain a constant pressure in the water system. More information
GLS delivery 3-4 working days. DHL express delivery 1-2 working days.
Would you like to get a price offer? Contact us
| Frequency converter | Yes |
| Head max | 55 m |
| Power | 230 VAC |
| Pump flow | 7 m3/h |
| Suction height | 8 m |
| Weight | 18.35 kg |
BROCHURE download
Download PDFCompact ISAR BOOST5-E-5 system from the Wilo brand to maintain a constant pressure in the water supply . The pump with integrated frequency converter is installed very quickly and commissioned immediately after connection. It is suitable for both residential and commercial use. The operation of the pump is very quiet , so it is also suitable for indoor installation.
.png)
The pump is able to adapt to any requirements and respond flexibly to them. As soon as the pressure in the system decreases due to the opening of one or more tapping points, the pressure sensor detects the drop and instructs the pump to start . This will increase the pressure again and maintain the water flow at all tapping points. The frequency converter takes care of the pump speed control and hydraulic power so that everything meets the installation requirements.
Intuitive operation, quick acquaintance, monitoring of operation and possible errors
optimizing water consumption and reducing energy consumption
fast and easy
a plug and pump system attached for immediate connection to the system, sensors, valves and pressure vessel
corrosion-resistant multistage self-priming pump
quiet, powerful, requires minimal maintenance
1. basic switch
2nd input for electrical cables
3. control panel
4. watering hole
5. inlet to the expansion vessel
6. venting
7. discharge
8. adjustable connection to the water drain
9. adjustable connection to the water supply connection
10. power supply cable
11. anti-vibration feet
12. fuse to secure the connection to the water supply and drain
1. ISAR BOOST5
2. shut-off valve
3. non -return valve
4. discharge line
5. Suction pipe
6. suction line
7. suction tank
8. suction tank
9. bottom valve
10. filter
The self-priming mode (green scheme) is switched on automatically from the factory and allows the pump to draw water from tanks, etc. However, if the tank or other water source is above the device and water is supplied to the device by gravity or the device is connected to the pressure grid, it is possible by turning knob to change the mode to normal suction (red / black scheme).
We respond to your product queries as quickly as possible, usually within 24 hours.
Bola.cz
Didn't find what you wanted to know?