Wilo TMW 32/8 submersible drainage pump is an indispensable helper for home use. The pump is ready for fully automated operation. A pressure hose or pipe can be used to drain off water (especially in case of permanent placement).

Function Twister (swirl)

The TMW sludge pump is equipped with a so-called "swirl". In practice this means that thanks to its construction there is a continuous swirl in the suction space. In this way the purity of the pumping pit will be achieved. Due to the "swirl" property and the associated sediment release, no odor is produced due to the pumped medium. The swirl function can be deactivated and the pump characteristic increases by 1m.

The minimum residual water level for maximum reliability is 2mm.

Pump usage

Pumping clean or slightly contaminated water:

• From tanks, shafts and excavations
• During flooding
• From the reservoirs
• When draining cellars

Pump features and equipment

• Float switch (factory mounted)
• Twister function (swirl)
• Interconnecting cable, 3 meters long, incl. plug "Schuko"
• Cooling by sweeping the pump housing
• Thermal engine control
• The pumped medium temperature is +3 ... + 35 °C (for up to 3 minutes, medium can be pumped up to 90 °C)
• Max. depth of draft 3 m
• Discharge throat Rp 1 1/4 (internal thread DN32).