If you are looking for a pump to handle clean or slightly cloudy water without mechanical impurities, the RUCHE submersible vibration pump is ideal for you. RUCHE pumps are based on Malyš pumps. Durable and long-lasting materials such as stainless steel, aluminium, and copper are used in their manufacture, with equal emphasis on reliability and safety. They are suitable for water supply in cottages, holiday homes, for garden irrigation, car washing, etc. The pump can also be used to drain and clean a well before installing a more expensive electronic pump such as the SQE from Grundfos.

Its operation is very simple, and due to its small external dimensions, it can be used in drilled wells with a diameter of just 104 mm (most wells are suitable) and to a depth of 40 m. You will also appreciate its light weight, low electricity consumption, and easy portability and installation for operation.

The pump has a bottom intake, which means that under certain conditions it can extract more water than the RUCHE 2T pump, which has a top intake. However, if the pump is too close to the bottom, it may suck in impurities, which is not as significant an issue when placed in a drilled well. Even so, the pump can be submerged up to 10 m below the water surface.

The pump is equipped with thermal protection, which automatically disconnects it in case of overheating of the working coil. Once cooled, the electrical circuit reconnects, thus protecting the coil from burning out and not shortening the pump's lifespan.

The submersible pump is not suitable for continuous operation (e.g., artificial streams, waterfalls, fountains) and for pumping chemical products, foodstuffs, saltwater, and water containing solid particles. After 2 hours of continuous operation, the pump must be turned off for 20 minutes; failure to do so results in harmful stress on the pump's coil.