The RUCHE 2T submersible pump, like the RUCHE 1 NG pump, is suitable for pumping clean and slightly turbid water without mechanical impurities. It is ideal for water supply in cottages, summer houses, for garden irrigation, car washing, and similar uses. RUCHE pumps are structurally based on Malyš pumps. Durable and long-lasting materials such as stainless steel, aluminium, and copper are used in their manufacture, with equal emphasis on reliability and safety.

The pump is ideal for draining and cleaning a well before installing a more expensive electronic pump or pumping set (for example: https://www.bola.cz/ponorne-cerpadlo-grundfos-sq-2-55-15m-cable). The presence of abrasive particles and impurities in the pumped water reduces the pump's lifespan, and the Ruche pump is primarily used due to its lower cost and as a precaution against damage to more expensive pumping equipment.

Its operation is very simple, and its small external dimensions allow it to be used in drilled wells with a diameter of just 104 mm (the vast majority of wells are suitable) and to a depth of 40 m. You will also appreciate its light weight, low electricity consumption, easy portability, and installation for operation.

The Ruche 2T pump has top suction, meaning the motor is positioned downwards. This ensures it never pumps out the liquid to the extent that it fails to cool the motor. Compared to the RUCHE NG 1 pump, it has a lower submersion level of 5 meters. For this reason, the RUCHE 2T pump has a cable length of only 25 meters.

The pump is also equipped with thermal protection, which automatically disconnects it in case of overheating of the working coil. Once cooled, the electrical circuit reconnects, thus protecting the coil from burning out and not shortening the pump's lifespan.

The submersible pump is not suitable for continuous operation (e.g., artificial streams, waterfalls, fountains) and for pumping chemical products, foodstuffs, saltwater, and water containing solid particles. After 2 hours of continuous operation, the pump must be turned off for 20 minutes; failure to do so results in harmful stress on the pump coil.