Flamco XStream Vent-Clean air and dirt separator. G 1 1/4 ". More information
Delivery to (days are avarages)
GLS: 3.5 workdays, € 8,99
Would you like to get a price offer? Contact us
Connection size | 1 1/4“ |
Connection type | Internal thread |
Material | Brass |
Pressure | 10 bar |
Temperature | 120 °C |
Weight | 2.40 kg |
Flamco XStream Vent-Clean dirt and air separator removes air bubbles and all impurities, including magnetite traces, from heating and cooling systems. This helps in longer life and less heat loss . Pipe wear is reduced and distribution maintenance can be kept to a minimum. Installation into the system does not require any special tasks and is quick and easy .
The separator has MAX and ECO modes . In ECO mode, only a certain amount of water flows through the separator. This leads to lower resistance and lower pressure drop. The pump does not have to strain so much. In MAX mode, the maximum amount of water flows through the separator from the system. This mode is suitable immediately after the installation of the separator and during regular system maintenance, so that the system is cleaned as best as possible.
The insulating jacket in which the separator is hidden reduces temperature losses to a minimum. The use of a separator maximizes the use of heating water and its even distribution throughout the heating unit.
Without the use of a separator
With separator
We respond to your product queries as quickly as possible, usually within 24 hours.
Didn't find what you wanted to know?