Dirt separator Flamco Clean Smart 2 (30026)

Compare
Print
Send to e-mail

Send product by e-mail:Dirt separator Flamco Clean Smart 2 (30026)

From email

To email

Additional message

Dirt separator Flamco Clean Smart 2 (30026)

Product code: 30026
EAN : 8712874300262
Manufacturer code: 30026
Warranty: 2 years

Dirt separator with magnet Flamco Clean Smart 2. G 2 " More information

Delivery

Delivery to Belgium (days are avarages)

GLS:
3.8 workdays € 8,99

Bpost HD (Home Delivery):
3 workdays € 9,91

BPost - PP (Pick-up Point):
3.4 workdays € 9,18

PostNL BE HD (Home Delivery) :
3.6 workdays € 8,94

DHL Economy:
2.4 workdays € 20,96

DHL Express:
1.6 workdays € 28,44

GLS: 3.8 workdays, € 8,99
In stock 4 pcs

Would you like to get a price offer? Contact us

Parameters and catalogs

Connection size	2"
Connection type	Internal thread
Material	Plast, Brass
Pressure	10 bar
Temperature	120 °C
Weight	2.75 kg

Instructions download

Download PDF

Technical sheet download

Download PDF

The Flamco Clean Smart dirt separator removes all dirt, including traces of magnetite, from heating and cooling systems. This helps in longer life and less heat loss . Pipe wear is reduced and distribution maintenance can be kept to a minimum. Installation into the system does not require any special tasks and is quick and easy . The Clean Smart separator is characterized by very low pressure losses and compact dimensions.

Function

Magnetic contaminants in piping systems and released from pipes can cause a range of problems in the heating / cooling system - from noise to pump damage and reduced heat transfer. Flamco Flamcovent Clean Smart separators capture these particles using magnets hidden in the logo. Once in a while, it is enough to release the magnet, the particles will fall down and the drain valve, together with water and other settled impurities, will flow out of the system.

Air and dirt are removed very efficiently also thanks to the double stream function. As it passes through the separator fitting, the water flows into the wider part of the venturi tube and from there it is led to the separator chamber, where it is freed of bubbles and impurities. It is then injected back into the venturi, this time into the narrower part, and from there it continues to the distribution system.