Can you help us with the website?
Don't worry, it's small text information that helps us evaluate the site or target relevant advertising. More about cookies here.
It will help us greatly if you enable everything. You can only enable the cookies you want. Alternatively, it is possible to disable everything except those strictly necessary for the functioning of the site.
Room controller one room Belimo CR24-A2 without control, 5 inputs, 2 outputs. More information
Out of stock - can be requested
Would you like to get a price offer? Contact us
Medium temperature | 15...36 °C |
Protection IP | IP 30 |
Weight | 0.11 kg |
Catalog sheet download
Download PDFThe Belimo CR24-A2 room controller provides an economical solution for individual temperature control in one room . It is suitable for VAV applications and combined 2 and 4 pipe systems . It has five inputs and two outputs. One or more VAV and heating controllers can be controlled from the outputs using a 3-point signal.
This is a function of energy efficiency of the controller , where it will heat the room only to its protection level. This function is especially suitable in periods when the room is not used and does not need to be heated or cooled unnecessarily, but still maintains the safe storage of flowers, paintings and more. The heating value is greatly reduced (15 ° C), while the cooling value is greatly increased (40 ° C).
This function is suitable for rooms that are used only occasionally or are temporarily abandoned. The heating and cooling values are adjusted only slightly to reduce costs, but at the same time it was not a problem to bring the room temperature quickly to the desired state.
If the room is cooled down below 10 ° C, the frost protection is activated.
Allows the room to be ventilated by maximum air flow . Especially suitable for quick ventilation during long meetings, in hotel rooms and more.
An external sensor for sensing the average room temperature in the ventilation duct can be connected to the ai1 input of the controller.
Input ai2 can be used to change the temperature setpoint thanks to an external signal 0 ... 10 V. This function is used for summer / winter compensation.
In heating operation, it allows increased air flow . This is required, for example, for heating with an air heater . The function also improves the air quality when the heating is switched on.
We respond to your product queries as quickly as possible, usually within 24 hours.
Shopping with us
Personal collection of goods
Opening hours
Payment options
Delivery options
Contact
Copyright © 2024 BOLA spol s.r.o.
Didn't find what you wanted to know?