Evikon E2638-R-CO-LCD gas detector

Carbon monoxide gas detector is used to detect and warn early of a dangerous (explosive or toxic) concentration of the sensed gas. The detector is suitable for use in underground parkings, boiler houses, kitchens, and other areas, where potentially toxic concentration of carbon monoxide can accumulate. The detector is equipped with two-level signaling - visual (LCD display) and acoustic(85db). Furthermore, two output relays (potential-free) with make contact can be used for remote signaling or ventilation / EM valve control, etc. The detector is built on a unified PluraSens platform. The platform enables connection of the detector, in addition to switching relays, also by two analog outputs 0-10V/4-20mA and digital interface ModBus RS485.
Made in robust design with IP65 protection - ABS plastic, resistant to mechanical damage. Rigid, tough, resistant to low and high temperatures, poorly absorbent, harmless to health.

The service life of the detector is more than 10 years.

The default alarm values are set to 65ppm and 130ppm of CO. The recommended coverage area per detector is 80-120 m², 5-6m radius.

Each detector is factory-calibrated to 65ppm and 130ppm CO. The law states that recalibration must be performed at least once every 12 months. Calibration may only be performed by a person certified by the manufacturer.

For more information on calibrations - www.kalibrovat. cz 

The detector is designed to detect flammable gases:
Carbon monoxide (CO)

DETECTOR CALIBRATED ON CARBON DIOXIDE.

Features:

• Selective, sensitive and stable detection of flammable gases
• Long-life electrochemical cell
• Wall mounting, IP65 protection
• Acoustic and visual alarm 
• LCD display
• Two output relays for alarm/ventilation control
• Digital communication ModBus RS485
• Two analog output signals 0-10V/4-20mA
• Selective, sensitive and stable detection of flammable gases

Tip: Get notified by the service about the date of legal calibration www.kalibrovat.cz

Tip: The detector can be equipped with a remote cable sensor.