Three-way flanged mixing valve ESBE series 3F. The valve body is made of cast iron. The three-way valve is designed for heating or cooling systems. The fitting is equipped with a lever for manual control and a scale for position determination. However, in most cases, control is provided by an actuator, see below. The valve's operating angle is 90°.

Examples of Use

• Heating applications
• Cooling
• Underfloor heating

The three-way valve Esbe 3F can be used as a mixing or also as a diverting valve.

Installation Example

Suitable Actuators

• Complete range of ESBE actuators series ARA 600 (adapter included with the actuator). Use only up to DN 50!
• Range of ESBE actuators series 90 (including controllers 90C etc.)
• Series of actuators CRA, CRB
• HVAC actuators BELIMO - any servo can be used (e.g., LM-A, NM-A, LF etc.) in conjunction with adapter type MKE....
• Actuators for mixing fittings BELIMO NRD, HT in conjunction with adapter MS-NRE6.

Service

All main parts can be replaced or resealed - a gasket set or a complete renovation kit is available. In most cases, it is not necessary to remove the valve from the application during service.