The Wilo TSW32 / 11 submersible slurry pump with float switch is an irreplaceable helper for pumping sewage at home. The pump is ready for fully automated operation. It is possible to use a pressure hose or pipe for water drainage (especially for permanent placement).

Twister function

The TSW sludge pump is equipped with a so-called "swirl". In practice, this means that, thanks to its design, there is a constant swirl in the suction space. In this way, the cleanliness of the sump is achieved. Due to the "swirl" property and the associated removal of sedimenting substances, no odor is caused by the pumped medium.

Using the pump

Pumping clean or slightly polluted or rainwater :

• From tanks, shafts and excavations
• During floods and floods
• From sinks
• When draining cellars
• Washing machine water with soap solution
• Water from small fountains, water attractions or streams

Features and equipment of the pump

• Float switch (factory mounted)
• Connecting cable with a length of 10 m incl. "Schuko" plugs
• Cooling by wrapping around the pump casing
• Thermal control of the engine
• The temperature of the pumped medium is +3 ... + 35 ° C (for a short time up to 3 minutes, the medium can be pumped up to a temperature of 90 ° C
• Max. immersion depth 7 m
• Discharge port Rp 1 1/4 (female thread DN32).