The Siemens RDZ101ZB thermostat is included of the Siemens Connected Home home automation system for smart heating. It is intended for temperature regulation in heating systems. Simple mounting on the wall or thanks to its wireless connection we can place it on a table.

Thermostat   it is wireless and powered by two 1.5 V AA size batteries . You can easily connect it via ZigBee 3.0 s router GTW100ZB . It is possible to connect up to 6 control thermostats to one ZigBee router , to add a larger number of thermostats it is possible to use another router or switching unit RCR110.2ZB as a signal repeater. You then simply control the entire Siemens smart heating system from the Connected Home mobile app, where we can easily set the daily heating mode. Thermostat RDZ100ZB   it also allows manual temperature adjustment using touch buttons. The power-saving display clearly shows settings and other details.

The Siemens Connected Home smart heating system is developed for heating residential and commercial buildings . The RDZ101ZB thermostat is suitable as a smart heating solution for remote control .

The thermostat is connected by a wireless switching unit of the Connected Home system. Equipped with 2-position / T PI control to achieve constant temperature, temperature sensor , open window recognition function   and   with protection against freezing .

The package also includes 2 AA batteries, 2 base mounting plates (one with a stand), the front part of the thermostat and assembly instructions .

Main features

• Room temperature regulation
• Wireless communication with the ZigBee router of the Connected Home system
• 2-position / TPI heating control with On/Off output
• Without built-in output relay, it controls the wireless switching unit of the Connected Home system
• Open window detection
• Protection against freezing
• The time program is set via the "Connected Home" mobile app (downloadable from Google Play or the Apple App Store)
• Configuration and control parameters adjustable via mobile application
• Battery powered (2xAA batteries)

The thermostat can also be set manually. This is done by three buttons located on the body and an LCD display that clearly displays both settings and warning messages and more. The "-" button decreases the set temperature, the "+" button increases it. Pressing and holding the form at the same time for 10 seconds will reset the device to factory settings. by pressing the power button, the display wakes up and the next one starts controlling the ON / OFF mode. Press and hold the button for five seconds to set the thermostat to connect mode.

Other products from the Siemens Connected Home series for the smart home: